Plus
$2/mo
- 1 dedicated IP address
- 10 devices
- 5 open ports
- 100 GBbandwidth
- 20 Mbpsspeed
Run services from home, a lab, Starlink, LTE, or another CGNAT connection by routing traffic through your own static IPv4 over WireGuard.
Starting at $2/mo.
Open WireGuard, tap connect, and you're online through your own IP address.
Plus for light use, Pro for most people, Ultra for full gigabit.
5× speed · 10× bandwidth · 2 IPs — only $2/mo more
Port forwarding only works if your ISP gives you a real public IP. Behind CGNAT — common with Starlink, LTE, and many cable and fiber ISPs — it does nothing. Egret bypasses this by routing a real public IPv4 back to your device over WireGuard.
Anything that listens on a port: web servers, game servers, SSH, home automation hubs, media servers, sync tools. If it can bind to an address and listen for connections, it works.
You need WireGuard running on whatever device hosts the service — a Raspberry Pi, an always-on router, or a home server. WireGuard is lightweight and reconnects automatically after interruptions.
Yes. WireGuard is supported on OpenWrt, pfSense, OPNsense, and most modern router firmware. Running it at the router level means all devices on your network can be reached without installing WireGuard on each one.
Have more questions? See the full FAQ →