Plus
$2/mo
- 1 dedicated IP address
- 10 devices
- 5 open ports
- 100 GBbandwidth
- 20 Mbpsspeed
Starlink commonly places users behind CGNAT. Egret gives you a static public IPv4 over WireGuard so your devices can be reachable from the internet.
Starting at $2/mo.
Open WireGuard, tap connect, and you're online through your own IP address.
Plus for light use, Pro for most people, Ultra for full gigabit.
5× speed · 10× bandwidth · 2 IPs — only $2/mo more
Yes. Starlink places most residential users behind carrier-grade NAT (CGNAT). This means you share a public IP address with other customers and cannot receive inbound connections or open ports.
Yes. Egret gives you a dedicated static public IPv4 that routes inbound traffic through a WireGuard tunnel to your device, so you can host services and accept connections even through Starlink's CGNAT — no hardware changes needed.
Your Starlink-connected device runs the WireGuard client with a config Egret provides. It connects outbound to Egret's node (which works fine through CGNAT), and all traffic to your dedicated public IPv4 is forwarded back through the tunnel to you.
No. WireGuard initiates outbound connections, so it works through Starlink's CGNAT without any hardware changes, firmware updates, or router bypass mode.
Have more questions? See the full FAQ →